
A mite calendar written for Ohio is wrong in New Zealand by six months, and a treatment threshold written for July is wrong in January for reasons that have nothing to do with the calendar. What travels between hemispheres is not the month; it is the colony phase. This article sets out a varroa monitoring calendar for the northern and southern hemispheres built on the colony phases the published thresholds actually refer to, with the sampling method, the sample size and the legal thresholds NSW beekeepers are working under.
It is written for commercial operators and for the distributors who supply them with monitoring and treatment equipment. The monitoring side is the part that decides everything else: you cannot time a treatment you have no count for, and you cannot justify a purchase order on a calendar that was written for someone else’s climate.
The numbers: mites per 100 bees, and the phase they belong to
Nearly every published threshold is expressed the same way: mites counted in a sample, converted to mites per 100 adult bees, then read against the phase the colony is in. The Honey Bee Health Coalition’s Tools for Varroa Management guide sets the treatment thresholds by phase, and its structure is the one used, with local adaptation, in North America, in the United Kingdom and in Australia.
| Colony phase | Acceptable, no control needed | Caution, control may be warranted | Danger, control promptly | Mites per 300-bee sample at the caution line |
|---|---|---|---|---|
| Dormant with brood | Under 1% | 1–2% | Over 2% | 3–5 mites |
| Dormant without brood | Under 1% | 2–3% | Over 3% | 6–9 mites |
| Population increase | Under 1% | 2–3% | Over 3% | 6–9 mites |
| Peak population | Under 2% | 3–5% | Over 5% | 9–15 mites |
| Population decrease | Under 2% | 2–3% | Over 3% | 6–9 mites |
Two things in that table are routinely missed. The threshold is loosest at peak population, where up to 2% is acceptable and 3–5% is only caution. It is tightest at the two ends: under 1% acceptable while the colony is building, and over 2% is danger once it is dormant with brood. A single “3% and treat” rule imported into every month will overtreat in high summer and under-treat in early spring.
Convert the percentage into the number you will actually count. The standard sample is a half cup of bees, roughly 300 workers. One per cent is 3 mites per 300 bees, two per cent is 6, and three per cent is 9. The NSW Department of Primary Industries publishes exactly this conversion, giving the field threshold as a mite count per 300-bee sample rather than a percentage.
Note also what the guide says about history: recommendations have moved downward over time, from older advice that waited for 10% or even 20% infestation toward current thresholds of 2%, 3% and 5%. Anyone quoting a 10% rule is working from superseded guidance.
Northern hemisphere: what to do in each month
The row to read in this calendar is the phase, and the months are where those phases usually fall in temperate North America and Europe. A warm Mediterranean or Gulf coast operation will run the same phases on a shifted calendar, and the phase is the thing that governs the number.
| Months | Colony phase | Sample it | Act when the count reaches | What the month is for |
|---|---|---|---|---|
| January | Dormant, with or without brood | Only in mild spells; confirm brood status before treating | Over 2% with brood, over 3% without | The broodless window is the most effective treatment opportunity of the year |
| February | Late dormant to first build-up | Yes, on the first warm inspection day | Over 2–3% | Catch the first mite rise before the colony commits to brood |
| March | Population increase | Yes, before the first flow | Over 3% | Build-up and mite build-up start together |
| April to May | Population increase | Every 3–4 weeks | Over 3% | Splits and swarm control; do not let a split carry the parent’s load |
| June to July | Peak population | Yes, monthly | Over 5% | Supers are on; only treatments cleared for use with supers can go in |
| August | Peak to decrease, after harvest | Yes, as supers come off | Over 3% | The single most important count of the year |
| September to October | Population decrease | Yes, and again after treating | Over 3% | Winter bees are being reared now; a clean count is the best predictor of survival |
| November to December | Decrease into dormant | Confirm the post-treatment count | Over 2–3% | Close the season with a recorded number, not an assumption |
August deserves the emphasis, and the published reasoning is specific. The guide notes that mite populations can surge rapidly after the honey harvest, when brood rearing slows and the adult population falls; the same absolute number of mites riding fewer bees is a higher percentage overnight. The bees reared in that window are the long-lived winter bees. A count taken in August and acted on in August is worth more than three counts taken in May.
Resample after every treatment. The guide’s own rule of thumb is direct: if in doubt, resample. A post-treatment count that still reads above the danger line means the treatment failed or the colony was reinvaded, and either way the next decision needs a number, not a date.

Southern hemisphere: the same phases, six months away
Australia, New Zealand, Chile, Argentina and South Africa run the same phases on a calendar that is shifted by roughly half a year, and the published legal thresholds in New South Wales are written to that calendar. NSW DPI publishes its thresholds by date band: from 1 March to 30 November, 5 or more mites in a 300-bee sample requires control; from 1 December to the end of the following February, the threshold is 9 or more mites. The 9-mite summer figure reflects peak colony population, and it is the same relaxation the Honey Bee Health Coalition table applies at peak.
| Months | Colony phase | Sample it | Act when the count reaches | What the month is for |
|---|---|---|---|---|
| January to February | Peak population | Monthly | 9+ mites per 300 bees in NSW; over 5% on the phase table | Nectar flow; only treatments cleared for use with supers |
| March to May | Population decrease | Every 3–4 weeks | 5+ mites per 300 bees in NSW; over 3% on the phase table | The most important window of the southern year; winter bees are being reared |
| June to August | Dormant, broodless in cold districts | Confirm brood status before treating | Over 2% with brood, over 3% without | The broodless window; in tropical and subtropical districts there may be none |
| September | Early population increase | Yes, before the main flow | Over 3% | First build-up; samples taken now set the spring baseline |
| October to November | Population increase into peak | Every 3–4 weeks until 30 November | 5+ mites per 300 bees in NSW until 30 November | Swarm and split management, and the last clean count before the summer threshold rises |
| December | Peak population | Yes | 9+ mites per 300 bees from 1 December | Flow period; the legal threshold relaxes but the mite load does not |
Three qualifications belong on that calendar. First, NSW DPI states plainly that its threshold figures are based on overseas experience, typically from countries with a winter brood break, and that understanding of the mite load causing economic and health impacts in Australia is still developing; the figures will be updated. Second, the continent is not one climate: a tropical operation may have year-round brood and no broodless window at all, while a Tasmanian or highland Victorian colony will be effectively broodless for weeks. Third, NSW requires surveillance of hives for varroa at minimum every 16 weeks, and treatment is mandated where monitoring reaches the threshold.
Context matters for planning. Varroa was detected on mainland Australia at the Port of Newcastle in June 2022; eradication was not successful, and from September 2023 the national position moved to management. That is a different operating environment from a European or North American one, and a mite calendar written before 2022 for Australia would have had no monitoring months in it at all.

Sampling method, sample size and how often
The count is only as good as the method. The standard is the 300-bee sample: a half cup of worker bees taken from a brood frame, with the queen kept out of it. NSW DPI names the alcohol wash as best practice in Australia, and the Honey Bee Health Coalition names the powdered sugar shake and the alcohol or soap wash as the two methods it recommends, while listing several other approaches it advises against relying on. Drone uncapping will tell you mites are present but gives no measure of load, so it cannot substitute for a count.
Method. NSW DPI names the alcohol wash as best practice; the Honey Bee Health Coalition recommends the alcohol or soap wash and the powdered sugar shake. The wash dislodges nearly every mite and the sampled bees do not survive; the sugar shake keeps them alive and is the routine-monitoring choice.
Sample size. About 300 bees, a half cup. Every published threshold is written per 100 bees, so a smaller sample produces a number that cannot be read against any of them.
Colonies per apiary. Fewer than 10 colonies, sample every one. More than 10, sample 10 or more, taken from the centre and the outer edges of the apiary, because infestation varies colony to colony inside the same yard.
Frequency. Monthly, except in winter in very cold climates. NSW requires surveillance at least every 16 weeks. Mite populations surge after the harvest and during build-up, and a single sample will miss the transition.
After treatment. Always resample. A count above the danger line after a treatment means another method, not another month.
The equipment side follows from the method. A wash needs a jar with a screened cap, a measured half-cup scoop and a liquid; a CO2-based tester avoids killing the sample and is the tool of choice where operators want to keep the bees. Either way the consumable list is short and the discipline is the expensive part: the operator who samples 200 colonies four times a year will out-manage the one who samples 20 colonies twelve times.
Why the discipline is worth funding is visible in the loss data. The 2025–26 US Beekeeping Survey, reported by the Apiary Inspectors of America, recorded annual colony losses of 39.9% between April 2025 and April 2026, with winter losses of 30.3% and summer losses of 23.3%. Beekeepers told that survey a winter loss around 21% would be acceptable, and 48% of them reported losses above that level. Annual losses stood at 55.1% and 55.6% in the two preceding years.

Why the calendar is really a threshold calendar
Reinvasion is the reason a good calendar still fails. A colony treated clean in August can be above threshold in October because mites came in from collapsing feral colonies and neglected hives nearby, and published extension guidance is explicit that this happens where varroa is newly established. The calendar tells you when to look; the count tells you whether the last treatment held.
Brood is the other reason. Most of the mite population reproduces inside capped brood, where no contact treatment reaches it. That is why the broodless window, when it exists, is the highest-value treatment opportunity of the year, and why operations in warm districts that never get one have to work harder with mechanical methods such as brood interruption and drone brood removal. It is also why a treatment applied to a colony in full build-up will read well immediately afterwards and badly a month later.
Plan the year on the phase, then write the months in for your own district. A Chilean operation and a Canadian one can use the same table and never share a month.
The monitoring checklist for the year
Work through this list once before the season starts and then once per phase. It is the difference between a treatment record and a treatment habit.
- Fix the sample size and the units. Half a cup, about 300 bees, recorded as mites per 300 bees and converted to mites per 100 bees. Every entry in the log uses the same units.
- Write the phase on every entry. Dormant with brood, dormant without brood, increase, peak, decrease. The number means nothing without it.
- Set the monitoring dates for your own hemisphere. Northern operators: before the first flow, monthly through build-up and peak, then as supers come off in August and again after treating. Southern operators: monthly across January and February, then the March–May decrease window, then the winter brood check.
- Confirm brood status before a dormant treatment. Look, do not assume. A treatment timed to a broodless colony that still has brood will underperform and the record will not explain why.
- Sample 10 or more colonies per apiary, from the centre and the edge. Under 10 colonies in the apiary, sample every one of them.
- Resample after every treatment, and record the post-treatment count in the same units as the pre-treatment count.
- Check the legal threshold for your jurisdiction and date band. In NSW the mandated figures are 5 mites per 300 bees from 1 March to 30 November and 9 mites per 300 bees from 1 December to the end of February, with surveillance required at least every 16 weeks. In England and Wales, work to the guidance and inspection service published by the National Bee Unit.
- Log the losses as well as the counts. Annual, summer and winter separately, against the acceptable level for your operation. The count tells you what to do; the loss rate tells you whether the year worked.
- Stock the consumables before the window opens, not during it: wash jars, scoops, alcohol or soap solution, replacement screens and the treatment itself, with the label temperature range checked against your district.
- Record reinvasion. Where feral or neglected colonies are nearby, a clean count that fails within a month is data, not a mistake. Note it and shorten the interval.
Equipment for this work is the cheap part of the programme. Enzher supplies the sampling and treatment tools that the calendar above runs on: the Varroa Easy Check for wash-based counts, the CO2 varroa tester where the sample has to survive, and the wider treatment and trapping range under pest catcher and varroa control. Order them against the month you will need them, which for a northern operation means August and for a southern one means March. The pollination and colony-health context behind all of it is set out by the FAO pollination programme.